Smoke Glossy Black self-healing TPU Taillight Tint
Fog Light Vinyl Film Rear Lamp Tinting Film
Features of TPU black headlight film:
1. Protect the car lights (fully isolate and protect the car light shell)
2. Block damage (acid rain, UV, grease)
3. Resist gravel scratches (prevent the roof cover from scratching)
4. Convenient maintenance (reduce the number of wiping)
5. Easy to peel and stick (to better protect the surface of the car light)
6. Extremely weather-resistant (one-time film application, many years of income)
7. Protect the paint surface (the paint surface is as bright as new, preserving the value of the car)
Car Headlight Film Installation:
Measure the size you need, then use the knife to cut. Choose the location to stick and clean with the wet towel.
Spray water thin on the surface of light. Rip away the film and spray water on it. Blow dry with heat gun to remove bubbles.
Use the tool again to strike off the bulb carefully as it will influence the eventually effect.
Use a art knife to cut the rest film.
Products name | | Material | High Polymeric PVC |
Color | black,gold,silver,red,blue,grey,pink,army green(12 colors) | Application | car headlight,fog light,tail light film |
Size | 30cm*10m/roll 40cm*10m/roll 30cm*30m/roll 1.2M*30M/roll | Adhesive power | 18N/25mm |
Face Film | 150mic (PVC) | Removable Adhesive | 40mic |
Release Liner | 140g,Silicone coated with air channels | Outdoor Durability | 3-5 years |
Suitable Temperature | -30 to +140 degrees | Package CBM | 0.034m³ |
Film produce technology | Calendered | Film thickness (with glue) | 200micron, 8mil |
Tensile strength | Along: min. 19Mpa, Across: min 19Mpa | Elongation | Along: min. 130%, Across: min. |