PET Gloss 6D Carbon Fiber Vinyl Wrap Car Vinyl
Products name | | Feature | |
Color | black | Application | |
Size | 1.52*18m/roll(5ft*60ft) | Adhesive power | 18N/25mm |
Face Film | 150mic (PVC) | Removable Adhesive | 40mic |
Release Liner | 160g,Silicone coated with air channels | Outdoor Durability | 3 years |
Suitable Temperature | -30 to +140 degrees | Package CBM | 0.034m³ |
Film produce technology | Calendered | Film thickness (with glue) | 200micron, 8mil |
Tensile strength | Along: min. 19Mpa, Across: min 19Mpa | Elongation | Along: min. 130%, Across: min. 150% |
Carbon fiber vinyl wrap 6D use for
Interior or Exterior of Automobile parts such as:
Dashboard, Steering wheel, interior door handles, Glove compartments, car control panel, Fenders, Door handles, tire rims, exhaust pipes, ect.
Dear Customer: when you received our product, If you notice the sticker is curled and wrinkled, please be careful , the sticker can be recovery as the below step:
1. Clean paste position;
2. Move away the bottom paper on the back;
3. Adjust the position and paste;
4. Use a hair dryer to heat the wrinkled and curled place of the car sticker, then use the scraper to flatten the sticker and remove air bubbles.
5. Move away the transfer film carefully;
6. Finish. Don't wash your car in 3 days.